It is a licensed plumber’s mission “to protect the health of the Nation”.
Our industry has made incredible improvements in protecting fresh water sources from cross contamination. One of the most significant advances has been due to the awareness of cross contamination and back flow.
Cross contamination occurs when any non-potable or hazardous liquid comes in contact with our fresh water supply. There are many obvious scenarios when visualizing this occurrence. Examples include sewage or hazardous material dumped into a lake, pond or reservoir. This is an example of direct cross contamination; when the contaminant comes directly in contact with the fresh water.
Prevention of direct cross contamination is fairly obvious. As with the above example, we simply should not dump sewage or hazardous material into our fresh water. However, cross contamination occurs in many lesser known situations. Please see Backflow Prevention for more details.
Most current plumbing codes specify 80 psi as the maximum pressure at which your potable water system may safely operate. AAA AUGER Plumbing Services ® Technicians are trained to provide water pressure tests to every home free of charge. Excessive water pressure can cause many problems to include ruptures in both supply lines and faucet packings (seals, o-rings, etc.) and the bursting of hot water tanks.
What causes excessive water pressure?
There are many factors that can affect water pressure either positively or negatively. Increased water pressure usually occurs when a pump from the municipal water source has been upgraded due to increased demand. Often, in growing communities, additional water towers are built which will result in increased pressure.
How is excessive water pressure addressed?
Whenever pressures are discovered to be over 80 psi, a Pressure Reducing Valve (P.R.V.) or similar mechanical regulator should be installed. The regulator will ensure that, beyond the point of installation, the water pressure will never exceed the safe limit.
Note: A Pressure Reducing Valve may negatively affect the performance of an irrigation system. Installing the regulator beyond the irrigation system’s tie into the water supply will prevent such problems. Also, when installing a P.R.V., the system becomes a “closed” system. Please see the Thermal Expansion section for more information.
Plumbing codes require that expansion tanks be used whenever a potable water system contains a Pressure Reducing Valve (PRV), a Backflow Preventer or a double check valve. When water flow is static or not flowing through the system, the aforementioned valves are closed which prevents water from reversing its intended course. This is referred to as a “closed system”.
Water, when heated, expands. The expansion increases its volume. For example, water heated from 90ºF to 140ºF in a 40 gallon water heater will expand by almost one-half gallon. Because water is not compressible, in closed systems, the increased water volume must go somewhere. This thermal expansion increases water pressure. Since pressure seeks the path of least resistance, annoying and potentially dangerous problems can occur. In an “open system” or a system that does not contain the aforementioned valves, the increased volume is able to find its way back into the municipal supply.
Thermal expansion can cause pressure surges, chronic or continuous dripping of temperature and pressure valves (T & P Valve), faucets and/or leaking fill valves in toilets.
More serious problems can also occur due to thermal expansion. When pressures within a water heater surpass the intended operating range, internal parts may fail such as internal flues, fittings or water connections. If a flue way collapses it can lead to the potential release of toxic gases, such as carbon monoxide into living spaces. Thermal expansion can also cause the water heater’s tank to rupture or explode. Minimally, this may require replacing the heater. However, there are many documented incidents that have caused major property damage and fatality.
Whether you live in Dallas, Fort Worth, Austin, Irving, San Antonio, or a nearby community, you can count on the certified and experienced plumbing experts from AAA AUGER Plumbing Services ®. We offer a variety of plumbing services, click an icon below to learn more about the services we offer.